CYLINDERS / TANKS and ACCESSORIES
GRANT'S PRICE? - TAKE 10% OFF THE RRP* (SOME EXCLUSIONS APPLY)
When selecting a cylinder for scuba diving the most important consideration should be long-term safety. A diving cylinder is a high pressure vessel that is exposed to not only the rigors of diving but also to wear and tear during transportation and general handling. Most countries have their own standard of manufacture requirements so it is critical you buy a cylinder that meets the AUSTRALIAN standards.
Australian Cylinder Stamp Interpretation. Refer to the figure.
Top Row
Serial Number = AB1234
Middle Row
Water Capacity (kg) = WC10.4kg
Date of Original Hydrostatic Test = 6,95
Test Station Mark =
Aust. Standard the cylinder is manufactured to = AS1777
Bottom Row
Tare Weight of Bare Cylinder (kg = TW14.2kg
Working (fill) Pressure (MPa) = WP24.0MPa at 15 degrees C
Hydrostatic Test Pressure (MPa) = TP36.0MPa
How steel cylinders are made...
How aluminium cylinders are made...
LUXFER ALUMINIUM CYLINDERS
Your diving cylinder stores high pressure air for your dive. Most countries have their own standard of manufacture requirements so it is critical you buy a cylinder that meets the standards of the country in which it is to be used.
Features
- All cylinders supplied with Thermo DIN/K Convertible Valves
- Backed by Luxfer 10 year warranty
- Made in Australia
11.1L (80 cu ft) RRP $385
9.0L (63 cu ft) RRP $375
5.7L (40 cu ft) RRP $355
2.9L (19 cu ft) RRP $295
2.9L (19 cu ft) O2 RRP $335
Luxfer cylinder ships with DIN/K valve.
More than 50 years ago, Luxfer developed the world’s first aluminum scuba cylinder in collaboration with the legendary Jacques-Yves Cousteau, inventor of the original Aqua Lung®1 equipment that revolutionized underwater diving.
The Luxfer advantage:
- Proprietary L6X® alloy, a specially balanced aluminum-magnesium-silicon formula exclusive to Luxfer.
- Luxfer scuba cylinders are manufactured to meet or exceed all recognized international standards.
- Luxfer scuba cylinders are cycle-tested in excess of 100,000 cycles at service pressure.
- Minimum burst pressure tested to 2.5 times service pressure without failure.
- Corrosion-resistant interior and exterior—unlike corrosion-prone steel tanks.
- Consistent weight.
- Thick, damage-resistant walls.
NEPTUNE ACCESSORIES
FABER STEEL CYLINDERS
Steel Cylinders - lighter and smaller than their equivalent in aluminium. Made from Chromium Molybdenum Alloy Steel, which is a light weight steel.
Prices are discounted approximate. Contact us for current prices.
- 55 cu ft (7L) $369
- 85 cu ft (10.5L) $399
- 100 cu ft (12.2L) $449
- 125 cu ft (15L) $495
TWIN SET NO.1 $1599
- 2 x 10.5L (85 cu ft) cylinders
- Twin manifolds
- Rubber boots
- Twin tank bands
TWIN SET NO.2 $1699
- 2 x 12.2L (100 cu ft) cylinders
- Twin manifolds
- Rubber boots
- Twin tank bands
CATALINA ALUMINIUM CYLINDERS
Prices are discounted andapproximate. Contact us for current prices.
Catalina Aluminium Cylinder with DIN/K Valve.
- 95 cu ft / 11.3L $---
- 85 cu ft / 10.5L $---
- 65 cu ft / 8.3L $---
- Working Pressure: 240 BAR
- Colour: Linished
Catalina Aluminium Cylinder with DIN/K Valve.
- 80 cu ft / 11.1L $349
- 40 cu ft / 5.7L $329
- 19 cu ft / 2.9L $289
- 6 cu ft / 1L $219
- Working Pressure: 207 BAR
- Colour: Yellow
FABER and CATALINA ACCESSORIES
APOLLO ALUMINIUM CYLINDERS
GRANT'S PRICE? - TAKE 10% OFF THE RRP* (SOME EXCLUSIONS APPLY)
High grade aluminium constructed especially to meet Australian safety standards.
Negatively buoyant when empty
Rugged enough for rental gear or sportdiving
Available in two different pressure ratings
Available with or without DIN / K convertible valve
Cylinders with Valves
95 Cu Ft / 11.3 L Din/K Valve 230 BAR $575
85 Cu Ft / 10.8 L Din/K Valve 230 BAR $565
80 Cu Ft / 11.1 L Din/K Valve 207 BAR $449
65 Cu Ft / 8.3 L Din/K Valve 230 BAR $555
Cylinders Only
95 Cu Ft / 11.3 L 230 BAR $520
85 Cu Ft / 10.8 L 230 BAR $510
80 Cu Ft / 11.1 L 207 BAR $394
65 Cu Ft / 8.3 L 230 BAR $500
Cylinders with Valves
40 Cu Ft / 5.7 L Din/K Valve 207 BAR $399
19 Cu Ft / 2.7 L Din/K Valve 207 BAR $349
13 Cu Ft / 1.9 L Din/K Valve 207 BAR $329
6 Cu Ft / 0.9 L Din/K Valve 207 BAR $289
Cylinders Only
40 Cu Ft / 5.7 L 207 BAR $344
19 Cu Ft / 2.7 L 207 BAR $294
13 Cu Ft / 1.9 L 207 BAR $274
6 Cu Ft / 0.9 L 207 BAR $234
